Bosch Motorsport More

Features

- Compact, lightweight housing in low-profile design with high-density packaging
- Robust 4 mm standard jacks for measuring leads
- Signal integrity of high-speed data links ensured by product-specific version
- Standard configurations and fully customized versions available
- No more lost jumpers due to patented 90° rotatable connectors

The Breakout Box BOB enables the operator to perform measurements and modify connections during operation. The jumpers allow to individually open or close each single connection without removing the jumper. Jacks provide access to all signals for measurement purposes. The box is essential for development and test environments in the lab and vehicle.

Please find further detailed information on the data sheet.

Ordering Information

Breakout Box BOB 66-pole
Connector code: orange

Order number: F02U.V02.296-01

Order number: F02U.V02.297-01

Order number: F02U.V02.299-01

Order number: F02U.V02.295-01

Order number: F02U.V02.298-01

Source of information: https://www.bosch-motorsport.com/content/downloads/Raceparts/en-GB/56005515119502091.html#/Tabs=56006667/

Features

- Compact, lightweight housing in low-profile design with high-density packaging
- Robust 4 mm standard jacks for measuring leads
- Signal integrity of high-speed data links ensured by product-specific version
- Standard configurations and fully customized versions available
- No more lost jumpers due to patented 90° rotatable connectors

The Breakout Box BOB enables the operator to perform measurements and modify connections during operation. The jumpers allow to individually open or close each single connection without removing the jumper. Jacks provide access to all signals for measurement purposes. The box is essential for development and test environments in the lab and vehicle.
This version was especially developed for use with Engine Control Units MS 6.

Please find further detailed information on the data sheet.

Ordering Information

Breakout Box BOB MS 6

Order number: F02U.V02.294-01

Source of information: https://www.bosch-motorsport.com/content/downloads/Raceparts/en-GB/56125067119544075.html#/Tabs=56127499/

Features

- Compact, lightweight housing in low-profile design with high-density packaging
- Robust 4 mm standard jacks for measuring leads
- Signal integrity of high-speed data links ensured by product-specific version
- Standard configurations and fully customized versions available
- No more lost jumpers due to patented 90° rotatable connectors

The Breakout Box BOB enables the operator to perform measurements and modify connections during operation. The jumpers allow to individually open or close each single connection without removing the jumper. Jacks provide access to all signals for measurement purposes. The box is essential for development and test environments in the lab and vehicle.
This version was especially developed for use with the LIFE connector of Engine Control Units MS 7 and Vehicle Control Unit VCU.

Please find further detailed information on the data sheet.

Ordering Information

Breakout Box BOB MS 7
Connector code: red

Order number: F02U.V02.293-01

Source of information: https://www.bosch-motorsport.com/content/downloads/Raceparts/en-GB/56142219119553931.html#/Tabs=56144651-3/

Features

- Compact, lightweight housing in low-profile design with high-density packaging
- Robust 4 mm standard jacks for measuring leads
- Signal integrity of high-speed data links ensured by product-specific version
- Standard configurations and fully customized versions available
- No more lost jumpers due to patented 90° rotatable connectors

The Breakout Box BOB enables the operator to perform measurements and modify connections during operation. The jumpers allow to individually open or close each single connection without removing the jumper. Jacks provide access to all signals for measurement purposes. The box is essential for development and test environments in the lab and vehicle.
This version was especially developed for use with PowerBox PBX 90.

Please find further detailed information on the data sheet.

Ordering Information

Breakout Box BOB PBX 90

Order number: F02U.V02.292-01

Source of information: https://www.bosch-motorsport.com/content/downloads/Raceparts/en-GB/56159371119563787.html#/Tabs=56161803/

Features

- Compact, lightweight housing in low-profile design with high-density packaging
- Robust 4 mm standard jacks for measuring leads
- Signal integrity of high-speed data links ensured by product-specific version
- No more lost jumpers due to patented 90° rotatable connectors

The Breakout Box BOB enables the operator to perform measurements and modify connections during operation. The jumpers allow to individually open or close each single connection without removing the jumper. Jacks provide access to all signals for measurement purposes. The box is essential for development and test environments in the lab and vehicle.
This version was especially developed for use with PowerBox PBX 190.

Please find further detailed information on the data sheet.

Ordering Information

Breakout Box BOB PBX 190

Order number: F02U.V02.523-01

Source of information: https://www.bosch-motorsport.com/content/downloads/Raceparts/en-GB/56289163119573643.html#/Tabs=56291595/

Features

- Communication interface for PC-supported calibration on K-line, CAN or Ethernet interface

The MSA-Box II is the low cost unit for PC-supported calibration and configuration on Ethernet, K-Line or CAN interface of an ECU.
The MSA-Box II is coupled to the PC via the USB interface. This ensures a powerful and universal link to all common PCs. The coupling to the ECU is effected via Ethernet, K-Line or CAN-interface of the diagnosis interface.

Please find further detailed information on the data sheet.

Ordering Information

Com Interface MSA-Box II

Order number: F02U.V00.327-03

Source of information: https://www.bosch-motorsport.com/content/downloads/Raceparts/en-GB/55608459119583499.html#/Tabs=55610891/

Features

- Quick and easy opening of ECU connectors

The Connector Opening Tool helps you to open connectors of ECUs like MS 7.4.

Please find further detailed information on the data sheet.

Ordering Information

Opening tool for shellsize 16

Order number: F02U.V01.393-01

Order number: F02U.V01.394-01

Source of information: https://www.bosch-motorsport.com/content/downloads/Raceparts/en-GB/55909771119595147.html#/Tabs=55911947/

Features

- Bosch Jetronic and Compact connectors inclusive contacts and sealings
- Autosport connectors from Deutsch, Tyco, etc.
- Connectors with 3 to 128 pins

Convenient to the Wiring Harnesses, we have a wide range of connectors on offer.
From single pin and Bosch series connectors above TE-connectors to Deutsch-motorsport connectors, you can choose from a big variation.
You can get from us different Deutsch-motorsport connectors of the series AS, ASL, ASU, ASX and ASDD. According to the series, these are 3 to 128-pin connectors.
At Bosch connectors you can choose from connectors of the Jetronic or Compact series. Furthermore you receive convenient contacts and sealings to our Bosch-connectors.
If you are interested, give us a call!

Please find further detailed information on the data sheet.

More Information

Source of information: https://www.bosch-motorsport.com/content/downloads/Raceparts/en-GB/55973771119622283.html#/Tabs=56004107/

Features

- One-stop-shop for consulting, manufacturing, development and service
- Manufacture of individual pieces and small batches
- Use of the highest quality materials
- Full test coverage based on the latest testing equipment for all products
- The complete package, from a single pin to a complete wiring harness

Bosch Motorsport expertise
Bosch Motorsport specialists have decades of experience in design and manufacture of customized wiring solutions for race cars and prototypes.
Increasing complexity in race cars necessitates a high degree of understanding in the electrical architecture of the project. We provide to you the extensive system know-how and the expertise of our specialists.
As a system supplier, we are familiar with the full spectrum of electronic requirements of the components in a racecar – from high current and high voltage applications to high-speed data networks.

Bosch Motorsport offer
Whether it is complete vehicle wiring, test equipment or a simple adapter – we design, plan, construct and test according to your individual requirements and requests.
If you want to build your wiring yourself, we also offer consulting and development support independently from our manufacturing services.
Give us a call!

Please find further detailed information on the data sheet.

More Information

Source of information: https://www.bosch-motorsport.com/content/downloads/Raceparts/en-GB/55878027119632011.html#/Tabs=55908363/